NAPIT-registered electrician covering Menston, LS29. Around 30 min north from our Bradford base. Free quote, fixed price, written guarantee.
Menston is a Wharfedale village between Guiseley and Burley-in-Wharfedale, with Otley just over the Chevin and Ilkley further up the valley. It sits in the Bradford district — the same council area as us — and is around 30 minutes north of our Bradford base. Our Menston prices are the same as Bradford's.
The older heart of the village, around the station and the main roads, is stone: Victorian and Edwardian terraces, semis and larger detached houses. Solid stone walls chase slowly and do not forgive a deep chase, so cable routes on those houses are planned through floors and lofts, or as a neat surface run where that is genuinely the better job.
Around that core are interwar and post-war semis and the estates built from the 1960s onwards. The PVC cabling in those houses is usually still sound, but many still have their original consumer unit, and an old board with no RCD protection is often the first thing an EICR flags. Then there are the converted former High Royds Hospital buildings and the newer housing built around them, where the work is more often extra sockets, lighting and EV chargers than remedial work.
The stone houses in the old part of the village are the ones most likely to need a full rewire: some still have rubber-insulated or early cable, and too few sockets for how a house is used now. A full rewire of a typical 3-bed semi is £4,500–£5,995, and larger detached stone houses are £6,500–£9,000. Most Menston terraces and semis take 3–5 days, with routes planned through floors and lofts to keep chasing in stone to a minimum. We test first, so the price is fixed before we start. Our rewire cost guide explains what moves the price.
Menston is a commuter village — the station on the Wharfedale line runs into Leeds and Bradford — and a lot of its houses have a drive or a garage beside them. That makes it good territory for a 7kW EV charger: usually a half-day install, with Northern Powergrid notified for you. If your house still has its original board, we quote the fuse board upgrade alongside the charger so there is one fixed price.
Buyers' surveyors increasingly query an old fuse box, and rented homes need an EICR at least every five years. If you are selling or letting in Menston, testing first tells you what is actually there before anyone puts a number on it. Our consumer unit cost guide explains what a board change involves.
Postcodes covered in Menston: LS29. We bring our own kit, dust sheets and the right consumer-unit / cable for the job — no second visits unless something genuinely changes.
The full Dixon Electrical service, available across Menston and surrounding West Yorkshire postcodes.
Old rubber/lead cabling replaced top to bottom. Most Menston terraces and semis 3-5 days.
Read more →RCBO 18th-Edition consumer-unit upgrade. Required for EV chargers + most modern alterations.
From £875 Read more →7kW home chargers in Menston. Load-balanced install, certificate issued same day.
£1,095–£1,150 Read more →Statutory 5-year EICR for Menston rentals. Most properties 2-3 hours, certificate issued.
From £200 Read more →No power, sparking, burning smell — same-day in Menston where possible.
£150 + £100/hr after Read more →Oven hardwires, extractor fans, smart-home wiring, commercial fits — all in Menston.
All services →Around 30 min north from our Bradford base, and in the same Bradford district. We know the Wharfedale stock — from Victorian terraces to modern infill.
Every notifiable job in Menston registered with Building Control via NAPIT — certificate issued at handover.
Steven did 26 years in the British Army. On time. Tidy. Finished. That's the standard in Menston.
The quote is the bill. No surprise extras at the end of a Menston job. Insurance and competence checked at NAPIT.
A full rewire of a typical 3-bed semi is £4,500–£5,995, and larger detached stone houses are £6,500–£9,000. Most Menston terraces and semis take 3–5 days. We test first, so the quote is fixed before we start.
Yes. Menston (LS29) is around 30 minutes north of our Bradford base and in the same Bradford district. NAPIT-registered, fixed-price, written guarantee, and we don't charge a callout fee for quotes inside our coverage.
No. Our prices in Menston are the same as Bradford. The drive is built into our day. You get the fixed price up front in writing — no hidden travel surcharges added at the end.
If you have a drive or garage, usually yes, and it is normally a half-day job. A standard 7kW driveway install starts from £1,095. We check your fuse board and main fuse on survey and notify Northern Powergrid for you.
Not by law — BS 7671 is not retrospective. But a board with no RCD protection will be coded on any EICR and is often queried by buyers and insurers. A standard RCBO board change starts from £875, and we test the circuits first so the price does not move on the day.
Yes. Dixon Electrical Solutions Ltd is fully NAPIT registered — every notifiable job in Menston (fuse-board changes, rewires, EV chargers, bathroom circuits) is registered with Building Control via NAPIT and you receive the certificate at handover.