Cost Calculator
Pick the job type and a few details. We'll give you an indicative cost range based on West Yorkshire 2026 prices — with no signup needed to see the numbers.
Larger properties typically need more circuits, sockets, or testing — bumps up the cost.
Indicative price
Most likely cost
£875 – £1400
Indicative ranges based on Yorkshire 2026 prices. Real number depends on the property — only a free quote visit gives a guaranteed fixed price. No call-out fee for quote visits in our service area.
Steven personally rings back within a few working hours with a fixed-price quote. No pushy sales, no commission upsell.
Steven personally rings back within a few working hours with a fixed-price quote. If it's urgent, call 0800 061 4526.
Please try again, or call 0800 061 4526.
Price guide
Most household electrical jobs in Yorkshire cost between £85 and £1,400 in 2026. A fuse board upgrade is typically £875–£1,400, an EV charger £1,095–£1,150, a landlord EICR £200–£500 and a full house rewire £4,500–£9,000. Every job is tested and certified, and we fix the price after a free quote visit.
Prices checked by Steven Dixon, owner of Dixon Electrical: NAPIT-registered electrician, 18th Edition qualified, ECS Gold card holder and British Army veteran. · Last updated
| Job | Typical price | Time on site | Certificate |
|---|---|---|---|
| Full house rewire | £4,500 – £9,000 | 3–5 days | NAPIT EIC + Building Regs notification |
| Fuse board (consumer unit) upgrade | £875 – £1,400 | 1 day | NAPIT EIC |
| EV charger installation | £1,095 – £1,150 | Half a day | NAPIT EIC + DNO notification |
| Landlord EICR | £200 – £500 | 2–4 hours | EICR, valid 5 years for rentals |
| Extra socket or new circuit | £90 – £450 | 1–2 hours | NAPIT minor works, or EIC for a new circuit |
| Oven or cooker hardwire | £85 – £280 | About 1 hour | NAPIT minor works |
| Extractor fan | £185 – £320 | 1–2 hours | NAPIT minor works |
| Emergency callout | £150 – £350 | On site | NAPIT minor works if work is done |
Prices are for a typical 3-bed house booked within two weeks. Small flats are usually about 10% less and large 4+ bed homes about 25% more. Booking this week adds around 10%, same-day emergency work around 50%.
A fuse board (consumer unit) upgrade usually costs £875–£1,400 and takes one day. The price covers the new board, fitting, full testing and a NAPIT Electrical Installation Certificate. The final figure depends on how many circuits you have and what the testing finds.
A full house rewire usually costs £4,500–£9,000 and takes three to five days, depending on the size of the house and how easy it is to get cables in. We notify Building Control through NAPIT for you. Plastering and making good is not included: most customers use their own plasterer once the cables are in.
A home EV charger usually costs £1,095–£1,150 fitted, including the charger, a dedicated supply, testing, the certificate and notifying your network operator (DNO). Most installs take half a day. If your fuse board needs upgrading first, we quote that separately.
A landlord EICR usually costs £200–£500, depending on the size of the property and the number of circuits. Testing takes two to four hours and the report is valid for five years on a rental. If anything fails, we quote the remedial work separately so you can decide.
No. Quote visits are free across our area, which covers West Yorkshire, Lancashire and Greater Manchester. Steven comes out, looks at the job and gives you one fixed price in writing.
Two jobs with the same name can be very different: the age of the wiring, the state of the fuse board and how easy it is to get to all change the work involved. The range above is what most of our customers pay. After a free visit we fix the price, and that is the price you pay.