NAPIT-registered electrician covering BL1 to BL7. 45 min west from our Bradford base. Free quote, fixed price, written guarantee.
Bolton is a straight run across the M61 and one of the Greater Manchester towns we work in most. Like Huddersfield it is a mill town that never quite stopped being one, and the housing runs from dense Victorian terraces near the centre to stone-built properties out towards Horwich, Bromley Cross and the moor edge.
Halliwell, Great Lever, Daubhill and Farnworth are terrace country: two-up two-downs and larger bay-fronted terraces, most with the meter in a cupboard by the front door or out in a back-yard box. Deeper in, the stock is full of part-rewires — a kitchen done in the nineties, an extension added in the two-thousands, and the upstairs lighting untouched since the sixties.
That mix is the thing to understand about Bolton wiring. It is rarely all bad or all fine. An EICR usually comes back with a handful of C2s clustered in the oldest circuits while the newer work is perfectly sound, which means the sensible answer is targeted remedial work rather than the full rewire people fear when they hear the word "unsatisfactory".
Out towards Horwich, Bromley Cross and Egerton the stone properties bring the same considerations as any solid-wall house: chasing is slow, deep chases are a bad idea, and sometimes a neat surface run is the better job. The larger houses up there also tend to have outbuildings, garages and workshops a long way from the board, which is a voltage-drop question rather than a simple cable-length one.
Bolton has a substantial private rented sector, and parts of the borough operate selective licensing, which adds conditions on top of the national rules. Wherever the property sits, the national duty is the same: an EICR at least every five years, a copy to tenants within 28 days, and remedial work completed within 28 days of an unsatisfactory report. Which streets are licensed changes over time, so check with the council rather than taking a landlord forum's word for it.
The practical advice we give Bolton landlords is the same one we give everywhere: test between tenancies, not the week a tenancy starts. A report that comes back with no RCD protection and missing bonding is a straightforward job in a quiet month and a nightmare in a busy one.
Most Bolton terraces have no off-street parking, and a cable across a footway is not a solution — it is a trip hazard and we will not install one. Where there is a drive, a yard with access or a garage, a charge point is normally a day's work. The thing that delays it is the main fuse: plenty of older Bolton properties are on 60A or 80A, and adding a 32A charger to a house with an electric shower changes the sums.
Bolton is Electricity North West territory. They own the cable in the street and the fuse in your meter box, and they are who we apply to for a supply upgrade to 100A. On a domestic supply it is normally free of charge, but it takes a few weeks, so the application goes in when the job is agreed rather than on the morning of the install.
Postcodes covered: the full local range. We bring our own kit, dust sheets and the right cable and board for the job — no second visits unless something genuinely changes.
The full Dixon Electrical service, available across Bolton and surrounding Greater Manchester postcodes.
Old rubber/lead cabling replaced top to bottom. Most Bolton terraces and semis 3-5 days.
Read more →RCBO 18th-Edition consumer-unit upgrade. Required for EV chargers + most modern alterations.
From £875 Read more →7kW home chargers in Bolton. Load-balanced install, certificate issued same day.
£1,095–£1,150 Read more →Statutory 5-year EICR for Bolton rentals. Most properties 2-3 hours, certificate issued.
From £200 Read more →No power, sparking, burning smell — same-day in Bolton where possible.
£150 + £100/hr after Read more →Oven hardwires, extractor fans, smart-home wiring, commercial fits — all in Bolton.
All services →45 min west from our Bradford base. We cover Yorkshire, Lancashire and Greater Manchester via the M62 corridor — we know the Greater Manchester stock.
Every notifiable job in Bolton registered with Building Control via NAPIT — certificate issued at handover.
Steven did 26 years in the British Army. On time. Tidy. Finished. That's the standard in Bolton.
The quote is the bill. No surprise extras at the end of a Bolton job. Insurance and competence checked at NAPIT.
Very rarely. Most Bolton houses have been partly rewired at some point — a kitchen in the nineties, an extension later — so a report usually comes back with a handful of C2 items clustered in the oldest circuits while the newer work is sound. That means targeted remedial work, not a rewire. A rewire is only the answer where the cable itself has failed, typically rubber or fabric-insulated wiring from the fifties and sixties.
At least every five years, with a copy to tenants within 28 days and any remedial work completed within 28 days of an unsatisfactory report. Parts of Bolton also operate selective licensing, which can add conditions, and the licensed areas change over time — so check with the council directly. Our advice is to test between tenancies rather than the week a new one starts.
Not by trailing a cable across the pavement — that is a trip hazard and not something we will install. If you have a driveway, a back yard with access or a garage, it is normally a day's work. Some councils are trialling cross-pavement charging gullies, which is a highways permission rather than an electrical one, so that conversation starts with the council.
Often, but not always, and it depends on the wall. Solid stone chases slowly and does not forgive a deep chase, so on some elevations a neat surface conduit run is genuinely the better job than cutting into the stone. We will tell you which we think each run should be and why. We fill chases flush ready for decoration, but we do not plaster or decorate.
Yes. We cover the whole Bolton patch (BL1 to BL7) from our Bradford base. Bolton is roughly 45 min west away — well within our standard service area. NAPIT-registered, fixed-price, written guarantee, and we don't charge a callout fee for quotes inside our coverage.
For booked work in Bolton we slot you in within a few days, typically 1-2 weeks for full rewires depending on the diary. For genuine emergencies (no power, sparking, burning smell) we aim for same-day attendance in Bolton where the schedule allows — call 0800 061 4526 first.
No. Our prices in Bolton are the same as Bradford. The drive is built into our day. You get the fixed price up front in writing — no hidden travel surcharges added at the end.
Yes. Dixon Electrical Solutions Ltd is fully NAPIT registered — every notifiable job in Bolton (fuse-board changes, rewires, EV chargers, bathroom circuits) is registered with Building Control via NAPIT and you receive the certificate at handover.
Bolton is part of our wider Yorkshire, Lancashire and Greater Manchester coverage via the M62 corridor — including Bury, Salford, Manchester and the wider M62/M61 corridor.